Review on Pool Plastering Rocklin

Through years of trial and error, research, testing and input from plaster manufactures and specialty chemical companies the following recommendations have been adopted by most of the pool industry as a standard for fire-ups. Fill pool continuously until water reaches water-line tile. (garden hose works best unless you prefer the bucket method). Starting with a clean filter weather it is a recently cleaned cartridge that is in good condition or a DE or Sand Filter that has been back-washed and ready to go. Start the pool pump/filter remove the timer pins (if applicable) to allow the system to operate continuously.Do you want to learn more? Visit weblink.


For every 10,000 gallons of pool water volume add a quart of a good quality sequestering agent I personally like "Jacks Magic" they have different products for different applications ie: salt pools vs non-salt pools. Ask your pool supplier for the right application for your pool. In addition to the sequestering agent add a qallon of muriatic acid for every 10,000 gallons as well. These chemicals should be added directly to the pool while walking around the perimeter of the pool. 

Now starting at the tile line with a good nylon 18" wall brush start brushing the pool surface from the tile line down towards the pool floor, overlapping each brush stroke as you work your way around the pool until all the walls have been brushed. Brush any and all steps, swim-outs and ledges as well. Starting with the shallow end of the pool start brushing the floor towards the deep-end of the pool at this time a cloud of dust should be following each and every brush stroke. Continue brushing the floor until you feel confident you have covered every square foot of pool surface.